low-peak ? cubefuse ? with and without indication finger-safe, dual-element, time-delay class j performance fuse, 1-100a, 600vac/300vdc 0309 bu-sb09230 page 1 of 2 data sheet 9000 catalog symbols: tcf_ indicating fuse (6-100a) tcf_rn non-indicating fuse (1-100a) dual-element, time-delay fuse: 10 seconds minimum operating time at 500% rated current ampere rating: 1 to 100a voltage rating: 600vac/300vdc interrupting rating: 300ka rms sym. (ul) 200ka rms sym. (csa) 100ka dc (ul & csa) agency information: ? ul listed special purpose fuse: guide jfhr, file e56412 ? csa certified fuse: class 1422- 02, file 53787 ? ce compliance for the european union low voltage directive other ratings/specifications: watts loss at rated current: tcf30: 3.99w tcf60: 6.23w tcf100: 9.51w operating and storage temperature range: 14 to 149f(-10 to 65c) material specifications: ? case: glass filled pes (polyethersulfone) ? terminals: copper alloy ? terminal plating: electroless tin ? indicator lens: pes (polyethersulfone) (indicating version only) ? indicator: energetic chemical carton quantity and weight catalog numbers (amp rating) indicating cubefuse tcf6 tcf10 tcf15 tcf17- 1 / 2 tcf20 tcf25 tcf30 tcf35 tcf40 tcf45 tcf50 tcf60 TCF70 tcf80 tcf90 tcf100 non-indicating cubefuse tcf1rn tcf3rn tcf6rn tcf10rn tcf15rn tcf17- 1 / 2 rn tcf20rn tcf25rn tcf30rn tcf35rn tcf40rn tcf45rn tcf50rn tcf60rn TCF70rn tcf80rn tcf90rn tcf100rn features and product benefits ? the world?s first finger-safe power fuse system. ? smallest footprint of any class fuse including class j, cc, t and rk. ? meets class j time-delay electrical performance requirements. ? available with and without open fuse indication to meet every customer requirement. ? the indicating version features easyi d? open fuse technology for faster troubleshooting and reduced downtime. ? faster response to damaging faults to help reduce destructive thermal and magnetic forces. ? true dual-element fuse construction with a minimum of 10 seconds time- delay at 500% of rating. ? long time-delay minimizes nuisance circuit openings due to temporary overloads and transient surges. ? high interrupting rating to safely interrupt faults up to 300ka. ? no venting of arc or molten metal and gases during opening. ? robust cycling and inrush current withstand. ? low let-through currents under fault conditions. ? provides type 2 ?no damage? protection for iec motors starters when properly sized. ? easy selective coordination with any other cooper bussmann ? low-peak ? class l, j and rk1 fuse with simple 2:1 amp ration between upstream and downstream fuses. amp carton weight per carton rating qty. lbs kg tcf1-30a 12 1.39 0.63 tcf35-60a 12 1.42 0.65 TCF70-100a 6 1.74 0.79 ccpb 1-, 2- & 3-pole disconnects for the quik-spec? coordination panelboard. data sheet 1160 cf_ quik-spec? safety switch disconnect (optional window). data sheet 1156 tcfh_n 100, 60 & 30a holders. data sheet 9007 ccp_cf 1-, 2- & 3-pole switched disconnects data sheet 1157 cubefuse holders, disconnects and safety switch the cubefuse is used in the following cooper bussmann ? products. 70-100a case size 35-60a case size 1-30a case size
? 2009 cooper bussmann st. louis, mo 63178 www.cooperbussmann.com 0309 bu-sb09230 page 1 of 2 data sheet 9000 the only controlled copy of this data sheet is the electronic read-only version located on the cooper bussmann network drive. al l other copies of this document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with desig n applications. cooper bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. cooper bussmann also reserves t he right to change or update, without notice, any technical information con- tained in this bulletin. once a product has been selected, it should be tested by the user in all possible applications. tcf_ and tcf_rn dimensions ? in (mm) time-current characteristic curves?average melt current limitation curves fuse dimensions - in (mm) amps a b c d e f g 1-15 1.88 0.75 1.00 0.23 0.04 0.63 0.27 (47.75) (19.05) (25.40) (5.84) (1.02) (15.88) (6.86) 17.5-20 1.88 0.75) 1.00 0.27 0.04 0.63 0.27 (47.75) (19.05) (25.40) (6.86) (1.02) (15.88) (6.86) 25-30 1.88 0.75 1.00 0.31 0.04 0.63 0.27 (47.75) (19.05) (25.40) (7.94) (1.02) (15.88) (6.86) 35-40 2.13 1.00 1.13 0.36 0.04 0.63 0.38 (54.10) (25.40) (28.58) (9.14) (1.02) (15.88) (9.65) 45-50 2.13 1.00 1.13 0.40 0.04 0.63 0.38 (54.10) (25.40) (28.58) (10.16) (1.02) (15.88) (9.65) 60 2.13 1.00 1.13 0.44 0.04 0.63 0.38 (54.10) (25.40) (28.58) (11.11) (1.02) (15.88) (9.65) 70-100 3.01 1.00 1.26 0.57 0.06 0.63 0.39 (76.45) (25.40) (32.00) (14.4) (1.60) (15.88) (9.93)
|
